As renewable energy adoption grows, Battery Energy Storage Systems (BESS) have become critical for stabilizing power grids and maximizing the value of solar and wind generation. Achieving stable BESS operation requires seamless coordination across four interdependent subsystems — battery management, power conversion, energy management, and environmental control. ADLINK delivers a layered edge-to-system architecture that connects rack-level sensors, container-level gateways, and system-level computing into one coordinated, real-time platform.
Challenges
Reliable and stable BESS operation depends on the seamless coordination of four core systems — collectively known as the "4S":
- Battery Management System (BMS) — monitoring battery health, state of charge, and safety at the cell/rack level
- Power Conversion System (PCS) — managing energy conversion between the battery and the grid
- Energy Management System (EMS) — optimizing overall energy dispatch and system-level decision-making
- Environmental Control System (ECS) — maintaining temperature, humidity, and ventilation within safe operating limits
Without tight integration across these layers, operators risk inefficient energy dispatch, delayed fault detection, and reduced battery lifespan or safety incidents.
Solutions
ADLINK addresses BESS coordination through a three-tier architecture spanning rack, container, and system levels:

Rack-Level HVAC Control — ADLINK NuDAM Remote I/O Modules
- Collects real-time data on temperature, humidity, and ventilation at the rack level
- Handles alarm and event triggering for early fault and safety detection
- Distributed I/O design connects directly to BMS and PCS equipment across multiple racks
Container-Level Edge Management — ADLINK EMU-200 Series IIoT Gateway
- Aggregates and coordinates data from connected NuDAM Remote I/O modules across the container
- Performs protocol conversion for seamless communication between field devices and upstream systems
- Acts as the central data bridge between container-level equipment (BMS, PCS) and system-level computing (EMS)
System-Level EMS Computing — ADLINK MXE Edge Series Computing Platform
- Provides real-time monitoring across the entire BESS installation
- Enables fault detection and system-wide optimization for energy dispatch
- Serves as the computing backbone for the Energy Management System (EMS), tying together data from all subsystems