General Features
● PCI Express® Gen1 x1
● Pulse Output Frequency up to 9.99 Mpps
● Encoder Feedback Input Frequency up to 16 MHz
● Mechanical Signal Input / Servo Interface IO
● 32-ch Onboard Isolated GPIO / 32-ch Extended TTL GPIO
● 12-ch Position Latch Input
● 16-ch Position Comparison Trigger Output
● 4-ch Dedicated CMP Output with Voltage Selection
● Selection of EL Logic NO/NC Mode by Switch
● Selection of DO Initial State by Switch
● Programmable Interrupt Control
● Security Protection for User's Program
● DIN-304C to Support Specific Motors by Cable Selection
Motion Features
● T-Curve and S-Curve: Asymmetric Profile is Configurable
● 13 Home Return Modes
● Speed and Position Change On-The-Fly
● Linear / Circular / Helical Interpolation
● Selection of Motion Stop Method: EMG / Deceleration Stop
● Backlash Compensator / Vibration Suppression
● High Speed Position Latch Function with Configurable Filter
● Flexible Position Comparison Trigger Output Function
Introduction
AMP-304C is an advanced 4-axis motion controller card with a PCI
Express® interface that can generate a pulse train up to 9.99MHz
to control a motor. With more general purpose as well as dedicated
IOs, functional logic selection switches, 4-channel encoder
feedback input, AMP-304C can be used for a multitude of scenarios
or applications.
As a motion controller, AMP-304C covers all functions of the AMP-
104C, which provides asymmetric speed profile settings in T-curve
and S-curve, selection of motion stop method, and changing
speed on the fly. Also supported are interpolation in linear, circular
and helical directions with any 2-4 axes, 13 home return modes,
backlash compensator, and vibration suppression.
Highly flexible position comparison trigger, and position latch
functions are provided. The trigger function can be implemented
by 16-channel output, including 4-channel dedicated output with
voltage selection by onboard jumpers, while the position latch
function uses a 12-channel input.
● OS Information
Windows 7/10 (x86/x64)
● Software Compatibility
• APS Function Library Support
• Visual Studio VB.NET, C#, VC.NET Compatible
● Software Recommendations
MotionCreatorPro2™ (MCP2)