The high-speed signal simulation lab
, pre and post route signal simulation ensures signal integrity during the design cycle, it also allows for performance optimization prior to prototype and test.
The high-speed signal verification lab
is equipped with several high-end signal analyzers and oscilloscopes to ensure that high-speed signals such as IEEE 802, PCI express, SATA, USB, HDMI, DP and DDR4 meet the requirement of the specifications.
The environmental lab
can be grouped in four main areas -
- dynamics - shock vibration and drop
- climate - temperature and humidity
- electric – power and ESD)
- emissions - EMI/EMC
The tests also include advanced testing such as HASS (highly accelerated stress screen) and HALT (highly accelerated life test) using dedicated test chambers.
The mechanical lab
- The wind tunnel test allows to measure airflow and air impedance for a system or board/blade; dust and water ingress protection for I-P-rating, as well as force measurement for Heat sink designs and Strain gauge test. Some of our products include CMOS imaging devices and LCD screens, for those color and luminance tests have been established. For mobile devices, touch panel test, keypad lifetime test, and connector life test are also established.
The RF lab
is used to verify the function and signal quality of wireless communication interfaces. It is equipped with specialty measurement instruments to verify 3G/LTE, Bluetooth, WiFi, NFC, BT and also GPS. Wireless communications has become very important for embedded systems; ensuring correct operation is a mandatory and critical item.
ADLINK is committed to a continued investment in equipment, training to keep up with the speed of change in technology.