嵌入式模組化電腦 COM-HPCCOM ExpressOSMSMARCQsevenETX 工業級顯示系統與平板電腦 工業級觸控顯示器Open Frame 平板電腦All-in-One 平板電腦IP69K 不鏽鋼工業級平板電腦邊緣AI媒體播放機 網路通訊與伺服器 AI GPU伺服器工業級邊緣伺服器網路安全平台P5G工業自動化專網-MicroRAN
GPU解決方案 NVIDIA MXM GPU模組NVIDIA專業繪圖解決方案Intel Arc MXM GPU模組Intel Arc 專業繪圖卡 強固型運算 CompactPCI SerialCompactPCIVPXPC104AVA Railway Rugged ComputersHPERC Defense Rugged ComputersPIDS 車用解決方案 自動駕駛解決方案AI-ADAS 解決方案
設計與製造服務 DMS+ (ODM/OEM 服務) 邊緣運算平台 工業電腦 / 主機板 / 單板電腦嵌入式電腦 / IoT Gateway邊緣 AI 運算平台AI 智慧相機機器人控制器工業級固態硬碟 (SSD) 醫療專用電腦與顯示器 醫療專用觸控電腦醫療專用顯示器醫療專用 BOX PC
自動化與控制 機器視覺運動控制與 I/OEtherCAT 運動控制解決方案HMI 平板電腦Remote I/O資料擷取模組GPIB 與數字化儀PXI平台與模組自主移動機器人工業物聯網閘道器 軟體 凌華科技 DDSZenoh
Position Override After movement begins, the position target can be changed on-the-fly even if the motion reaches maximum velocity.
Spiral Interpolation If the start point and destination of a circular interpolationmovement lie on different planes, a Spiral function is requiredto directly regulate the movement.
T-Curve / S-Curve Velocity Profile Acceleration and deceleration times are programmable, and rates can be set individually, with S-curve motion compensating for generated mechanical vibration.
Linear and Circular Interpolation To complete multidimensional motion, any 2, 3, or even all 6 axes are required for linear interpolation and any 3 axes can execute circular interpolation.
Continuous Move (Contouring) Continuous movements comprise a range of linear and circular interpolated paths. Point-Table functions support hundreds of paths to smooth the velocity of continuous movement supported by included velocity planning software..
Synchronization Simultaneous start/stop can be executed on multiple axes in one card, or multiple axes across multiple cards, using software or external input signals. This feature is especially beneficial for complicated motion patterns requiring absolute synchronization of multiple axes.
Path Blending Anticipating sharp corners and small arc path execution, path blending is required to decelerate automatically and ensure smoothness of the velocity at junctions of two linear paths.
Velocity Planning Velocity planning is required to smoothly implement continuous movement and reduce vibration. The velocity of each path is generated automatically according to corner angles of complete paths.
IEC 61131-3 The third section of the open international standard IEC 61131 for programmable logic controllers, CODESYS (provided by 3S enterprise) is integrated into specific ADLINK motion controllers.
PID Plus Feedforward Gain Control All servo applications require specified safe and stable PID loop parameters in order to perform position control, ADLINK Softmotion provides a proportional-integral-derivative (PID) algorithm with adjustable acceleration and velocity and feed-forward gain to simplify servo application development..K
Auto-tuning In order to reduce tuning efforts and acquire accurate PID parameters, auto-tuning applications are provided in ADLINK dedicated software, allowing conditions to be configured according to real application requirements.
Electronic Gearing To implement multi-axis synchronization, this function sets a ratio between multiple slave axes and one master axis to simplify mechanism. One example is a system where two rotating drums turn at a given ratio to each other.
Pitch Compensation Irrespective of the type of ball screw system used, there always exists the non-linear section of the whole ball screw that affects the accuracy of overall motion. This function compensates for pitch error in real time.
Position Compare & Trigger Output Up to 20MHz encoder input frequency, hardware-based high-speed position comparison, and trigger output, ideal for AOI applications.
Encoder Event To accelerate the throughout of entire motion system, the encoder event is used to triggers other axis movement immediately when the target axis achieves the planned position.
Automatic Backlash Compensation Upon direction change, outputs backlash corrective pulses before sending commands. This function only supports single-axis movement.
PWM Generation In general PWM generates pulse up to 25MHz with either fixed frequency or fixed duty-cycle modes, and is suitable for laser, and dispensing applications.
Position Latch The latch function captures the instant counter value of one certain axis when the latch signal activates. The LTC channel is used to receive the latch pulse and the latch function is implemented with hardware.
DSP Digital Signal Processing allows time-critical motion control, multiple axis synchronization, and standalone control in a variety of applications.
Hardware Emergency Input A safety protection feature providing emergency shutdown in case of malfunction.
Manual Pulsar Input Interface Some motion control solutions provide an interface that connects manual pulsar input devices, which can be used to move the axes.
Analog Output / Analog Input Channels Some products offer analog output/input channels for voltage signals.
Digital Encoder Input Most feedback signals can be classified as digital pulse types consisting of A, B phase and index signals. Normally the frequency of digital encoder can be supported up to 20MHz (@4xAB phase).
Diagnostic The EtherCAT-network error diagnostic tool which can detect communication packet and network topology status. Users can check network status immediately, and find the bad network stations for their topology, reducing troubleshooting time.
Ethernet Connectivity Considering the cost and flexibility of overall automation equipment design, Ethernet connectivity allows localization of movement or I/O modules to save space and extend control through adding the modules.
Field Bus Connectivity Field Bus Connectivity localizes motion of I/O modules to save space and extend control through addition of modules, with dedicated I/O and Motion provided as “HSL” and “MNET” respectively.
EtherCAT Connectivity EtherCAT supported is a variety of connection topology methodologies, including star, tree, and ring types. As a result, EtherCAT offers unified, powerful communication for the entire automation sector, ensure quality.
