ADLINK Products Lines and Software Solutions.

Remote Data Acquisition Modules > Converter Modules
ND-6510
RS-422/RS-485 Repeater
ND-6510
Features
  • Input: RS-485 (2-wire, half-duplex) or RS-422 (4-wire, full-duplex) protocol
  • Output: RS-485 (2-wire, half-duplex) or RS-422 (4-wire, full-duplex) protocol
  • Speed: 115.2K, 57.6K, 38.4K, 19.2K, 9600, 4800, 2400, 1200, 600, 300
  • Auto baud rate and data format adjustment
  • Isolation Voltage: 2500 Vrms
  • Surge protector on communication signals
  • Connector: Plug-in screw terminal block
  • Power Consumption: 0.7W typical
ND-6520
RS-232 to RS-422/RS-485 Converter
ND-6520
Features
  • Protocol: RS-485 (2-wire, half-duplex) or RS-422 (4-wire, full-duplex) protocol
  • Speed: 115.2K, 38.4K, 19.2K, 9600, 4800, 2400, 1200, 600, 300
  • Auto baud rate and data format adjustment
  • Isolation side: RS-232
  • Isolation Voltage: 2500 Vrms
  • Surge protector on RS-422/485 communication signals
  • Repeater request: Over 128 modules or distance over 4,000 feet
  • Connector: Female DB-9 and plug-in screw terminal block
  • Power Consumption: 0.75W typical
ND-6530
USB to RS-232/RS-422/RS-485 Converter
ND-6530
Features
  • Protocol: (DIP switch selectable)
    RS-232 (5-wires) (RXD, TXD, RTS, CTS, GND)
    RS-485 (2-wire) (Data+, Data-)
    RS-422 (4-wire) (TX+, TX-, RX+, RX-)
  • Connector: USB B-series male and plug-in screw terminal block
  • Speed: 300 ~ 115.2K bps
  • Isolation side: USB
  • Isolation Voltage: 2500 Vrms
  • Fully USB compliant
  • Pepeater request: Over 128 modules or distance over 4,000 feet
  • Power Consumption: 0.6W typical
Driver Manual (pdf) Datasheet (pdf)
ND-6531
Configurable Communication Controller
ND-6521
Features
  • Protocol:
    RS-232 (5-wires) (RXD, TXD, RTS, CTS, GND)
    RS-485 (2-wire) (Data+, Data-)
    RS-422 (4-wire) (TX+, TX-, RX+, RX-)
  • Speed: 1200 ~ 115,200 (RS-232 and RS-422/485 can set to different baud rate)
  • Convert RS-422/RS-485 to RS-232 with configurable address
  • Isolation Voltage: 1000V DC
  • Surge protector on communication signals
  • Repeater Request: over 128 modules or 4,000 feet
  • Connector: Female DB-9 and plug-in screw terminal block
  • Power Consumption: 0.75W typical
  • Software compatible with ND-6521
Driver Manual (pdf) Datasheet (pdf)
NDP-243-243U
Panel Mounting Power Supply
Features
  • Input Voltage : 85 ~ 132V AC or 170 ~ 264V AC, switchable (243U: 90 ~ 264V AC, Full Range)
  • Input Frequency : 47 ~ 63 Hz
  • Input Current : 1.4A (max.)
  • Short Protection
  • Output Voltage : +24V DC±10% (243U: +24V DC 1A, +12V DC 1A, +5V DC 3A)
  • Output Current : 3A (max.)
  • Overload Protection
  • Dimensions: 5" (L) x 3.8" (W) x 1.6" (H)
  • Operating Temperature : 0° ~ 50°C
Driver Manual (pdf) Datasheet (pdf)

All PDF formated files in this website are best view using Adobe Acrobat Reader Ver 4 and above. You can download a free copy from Adobe's Web Site.
You can download the free software to extract the zipped files!

Mail to WebMaster