Specifications
- Slave ID consumption: 1
- 8-CH digital input and 8-CH digital output
- -NN: for NPN sinking type sensor input or dry contact and
NPN sinking type output
- -PN: for PNP sourcing type sensor or wet contact and NPN
sinking type output
- -NP: for NPN sinking type sensor or dry contact and PNP
sourcing type output
- -PP: for PNP sourcing type sensor or wet contact and PNP
sourcing type output
- Photo couple isolation voltage: 2500 Vrms
- Input impedance: 4.7K ohm
- Input current: ±10mA (Max) , ±12.5mA (Peak)
- Input voltage: ±40V (Max)
- Output switching capacity: Single channel 500mA; all channels
60mA at 24V DC
- Output response time: ON-->OFF: 180µs, OFF-->ON
:1.2µs
- LED indicator: Power, Link and I/O status
- On board field I/O wiring connection for HSL I/O modules
- Spring terminal for easy field wiring
- Power and ground included (each pair of power/ground was shared
by two I/O points)
- DIN rail mounting
- Terminator on board
- I/O Wire Gauge: 16 AWG. (max.); 24AWG. (min.)
- Power supply: +10V to +30V DC
- Operating temperature: 0 to 60°C
- Storage temperature: -20 to 80°C
- Power consumption: 1.4W
|
Driver
