ADLINK Technology Revolutionizes Rugged Small Form Factor (SFF) Computing with the CoreModule® 730 SBC

ADLINK Technology Revolutionizes Rugged Small Form Factor (SFF) Computing with the CoreModule® 730 SBC

First to market from a leading multi-national supplier with the ground-breaking SUMIT™ interface in 90x96 mm ISM™ form factor, CoreModule® 730 ushers in a new 'Atomic' Era of Rugged Computing.


CoreModule® 730
Get Quote

ADLINK Technology Inc.(TAIEX:6166), a leading global provider of trusted embedded products, today announced the biggest architectural innovation in small form factor (SFF) rugged single board computers (SBCs) since the PC/104 bus was invented by Ampro in 1992. The new CoreModule® 730 embedded processor, based on the ultra low power Intel® Atom™ Z510 and Z530 processors at 1.1 and 1.6 GHz, respectively, sets a new efficiency standard for tiny rugged computers by using the new SUMIT™ expansion interface. It reinvents stackable and mezzanine architectures by packing an enormous amount of data bandwidth and easy connectivity - including multiple PCI Express® lanes, USB 2.0 interfaces, LPC bus, I2C bus, and SPI bus - into a fraction of the space previously occupied by only the 33 MHz parallel PCI-104 bus.

With PCI Express, Gigabit Ethernet, USB 2.0 ports, and a CompactFlash® socket, the CoreModule® 730 features the lowest power Intel chipset available, the US15W, to complement the Intel® Atom™ processor for a total power consumption of only 5 watts. Conductive cooling solutions are also easy to implement for small sealed boxes with no internal air flow. The release of the CoreModule® 730 means that system OEMs in military, avionics, transportation, data logging, portable computing and other rugged markets can add a state-of-the-art Intel® Architecture controller to their systems without a custom carrier board design.

"While many board manufacturers require their system OEM customers to design custom carriers or use two-board solutions in order to take advantage of their Atom-based computer-on-module (COM) products, ADLINK offers CoreModule® 730 as a true single-board solution, ready to run with simple cables," said Colin McCracken, product director for ADLINK's embedded computer division. "By departing from space-inefficient pin-in-socket expansion with parallel buses, CoreModule® 730 will bring stackable SBCs into new application areas. Even after the merger, ADLINK continues to build upon Ampro's reputation and tradition of pioneering modular small form factor technologies for high-reliability and long lifecycle embedded markets."

About the CoreModule® 730
The CoreModule® 730 is the first SUMIT-ISM™ product on the market. SUMIT™ is the new standard expansion interface from the Small Form Factor Special Interest Group (SFF-SIG), www.sff-sig.org. Ampro by ADLINK™ stands for Industry Standard Module, and is a 90x96mm form factor that specifies a board outline and mounting holes and is completely flexible in terms of expansion interfaces. Ampro by ADLINK™ is also defined by the SFF-SIG. The CoreModule® 730 offers a choice of 1.1 GHz and 1.6 GHz Atom™ processors, US15W chipset, DDR2 533 SODIMM RAM up to 2 GB, Gigabit Ethernet, four USB 2.0 ports, IDE interface, CompactFlash socket, 8 general-purpose I/O pins (GPIOs), and integrated graphics engine with H.264 decode acceleration, analog VGA output and 18-bit / 24-bit LVDS interface for LCD displays.

 more Ampro Extreme Rugged Single Board Computers Products


About ADLINK

ADLINK Technology is enabling the Internet ofThings (IoT) with innovative embedded computing solutions for edge devices,intelligent gateways and cloud services. ADLINK's products are application-ready for industrial automation, communications, medical, defense, transportation, and infotainment industries. Our product range includes motherboards, blades, chassis, modules, and systems based on industry standard form factors, as well as an extensive line of test & measurement products, smart touch computers, displays and handhelds that support the global transition to always connected systems. Many products are Extreme Rugged™, supporting extended operating temperature ranges, and MIL-STD levels of shock and vibration.

ADLINK is a Premier Member of the Intel® Internet of Things Solutions Alliance and is active in several standards organizations, including the PCI Industrial Computer Manufacturers Group (PICMG), the PXI Systems Alliance (PXISA), and the Standardization Group for Embedded Technologies (SGET).

ADLINK is a global company with headquarters in Taiwan; manufacturing in Taiwan and China; R&D and integration in Taiwan, China, the US, and Germany; and an extensive network of worldwide sales and support offices. ADLINK is ISO-9001, ISO-14001, ISO-13485 and TL9000 certified and is publicly traded on the TAIEX Taiwan Stock Exchange (stock code: 6166).

For more information, please contact our worldwide offices nearest your region.
ADLINK Technology, Inc., Headquarters

9F., No.166, Jian 1st Rd., Zhonghe Dist., New Taipei City, Taiwan 235
Tel: +886-2-82265877
Fax: +886-2-82265717
http://www.adlinktech.com
Email: service@adlinktech.com

Ampro ADLINK Technology, Inc.
5215 Hellyer Avenue, #110, San Jose, CA 95138, U.S.A.
Toll Free: +1-800-966-5200
Fax: +1-408-360-0222
Email: info@adlinktech.com

LiPPERT ADLINK Technology, GmbH
Hans-Thoma-Str. 11, 68163 Mannheim, Germany
Toll Free: +1-800-966-5200
Tel: +49-621-432140
Fax: +49-621-4321430
Email: emea@adlinktech.com


Back NewsPast Product News: 2001-2013

   Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.