ADLINK Introduces New PCI-9820 High-Speed digitizer


Supports 512MB Standard SDRAM - Lowers Costs Designed for Military, Broadcasting, or Other High-Level Applications



see the product info.

ADLINK TECHNOLOGY INC., the Little Giant of Industrial Computers, proudly announces that its new High-Speed digitizer card, the PCI-9820, will be available at the end of the month.

The PCI-9820 is specifically engineered for high-level applications, including military radar and ultrasonic signal acquisition, digital broadcasting signal acquisition, and RF signal analysis (when used with a band-pass filter and down conversion).

The PCI-9820 is a high speed, high resolution, high capacity DAQ card equipped with two analog inputs and a system synchronization interface (SSI). The PCI-9820 provides 14-bit resolution and can maintain single channel and dual channel sampling rates of 130MS/s and 65MS/s, respectively.

The two -3dB, 30MHz analog ports provide adequate bandwidth to satisfy the Nyquist theory. Input ranges (-1V to 1V or -5V to 5V) are selected via software. Input impedance (50[ or 1M[) is selected through solder points. The PCI-9820 offers maximum analog input flexibility for multiple front-end applications.

Most importantly, the PCI-9820 maintains the ADLINK DAQ-2000 series design with automatic correction only a command away. Analog input channel correction is extremely clean without the hassle of tedious manual work.

The PCI-9820 card exceeds the 33MHz, 32-bit PCI bus bandwidth through its single-channel dataflow, so memory flexibility is very important! The PCI-9820 is equipped with standard SODIMM SDRAM for high-speed storage and easy upgrades.

The PCI-9820 comes equipped with 64MB of RAM, expandable to 512MB. It supports single channel sampling rate of 60MS/s. Besides using SDRAM for storage media, the PCI-9820 provides DMA transmission to instantaneously transfer data to system memory when acquisition bandwidth is less than that of the PCI bus. Even though other DAQ card manufactures use onboard RAM, ADLINK's PCI-9820 uses standard market RAM making upgrades cheap, easy, and simple.

The PCI-9820 is also equipped with several triggering methods: software, analog, and digital. Analog triggering can be configured through numerous options, whereas digital triggering supports rising edge and falling edge triggering. The PCI-9820 also supports external clocking for simultaneous data acquisition across multiple cards.

The PCI-9820, similar to the DAQ-2000 series, includes a System Synchronization Interface (SSI). Through the SSI bus, users can easily prepare synchronization projects.

Barring future PCI revisions, ADLINK TECHNOLOGY INC. will continue to develop and supply the PXI-9820 as an upgrade path. ADLINK was the first in Asia to produce DAQ cards in 1995. Through continued technology development and advancement, the 20MS/s, 4-channel PCI simultaneous DAQ card, the PCI-9812, was released in 1997. 1998 saw the dawn of the PCI-7300A, an 80MB/s PCI I/O card. The eight products of the DAQ-2000 series came out during 2000-2002. The birth of the PCI-9820 represents ADLINK's leading role in the industry's strict standards and commitment to advancing technologies. ADLINK strives to produce superior quality test & measurement and automation products at reasonable prices.


About ADLINK
ADLINK Technology provides a wide range of embedded computing products and services to the test & measurement, automation & process control, gaming, communications, medical, network security, and transportation industries. ADLINK products include PCI Express-based data acquisition and I/O; vision and motion control; and AdvancedTCA, CompactPCI, and computer-on-modules (COMs) for industrial computing. With the acquisition of Ampro Computers, Inc. and LiPPERT Embedded Computers GmbH, ADLINK also provides a wide range of rugged by design Extreme Rugged™ and Rugged product lines including single board computers, COMs and systems.

ADLINK strives to minimize the total cost of ownership (TCO) of its customers by providing customization and system integration services, maintaining low manufacturing costs, and extending the lifecycle of its products. ADLINK is a global company with headquarters and manufacturing in Taiwan; R&D and integration in Taiwan, China, the US, and Germany; and an extensive network of worldwide sales and support offices.

ADLINK is ISO-9001, ISO-14001, ISO-13485 and TL9000 certified, is a Premier Member of the Intel® Intelligent System Alliance, an Executive Member of PICMG, a Sponsor Member of the PXI Systems Alliance, an Executive Member of PC/104 Consortium, and a Strategic Member of the AXIe Consortium. ADLINK is a publicly traded company listed on the TAIEX Taiwan Stock Exchange (stock code: 6166).

For more information, please contact our worldwide offices nearest your region.
ADLINK Technology, Inc., Headquarters

9F., No.166, Jian 1st Rd., Zhonghe Dist., New Taipei City, Taiwan 235
Tel: +886-2-82265877
Fax: +886-2-82265717
http://www.adlinktech.com
Email: service@adlinktech.com

Ampro ADLINK Technology, Inc.
5215 Hellyer Avenue, #110, San Jose, CA 95138, U.S.A.
Toll Free: +1-800-966-5200
Fax: +1-408-360-0222
Email: info@adlinktech.com

LiPPERT ADLINK Technology, GmbH
Hans-Thoma-Str. 11, 68163 Mannheim, Germany
Toll Free: +1-800-966-5200
Tel: +49-621-432140
Fax: +49-621-4321430
Email: emea@adlinktech.com


Back NewsPast Product News: 2001-2013

   Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.