PCI-7250/7251 - Data Acquisition - Digital I/O - ADLINK Technology
ADLINK Home > Products > Data Acquisition > Digital I/O > PCI-7250/7251
ADLINK-PCI-7250/7251-Data Acquisition-Digital I/O

Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote


 Get a Quote  Datasheet
8-CH Relay Outputs & 8-CH Isolated DI PCI Cards

  • Supports a 32-bit 5 V PCI bus
  • 8-CH relay outputs on PCI-7250
  • 8-CH isolated DI
  • On-board LED indicators for relay status
  • On-board relay driving circuits
  • Relay output stats read back
  • On-board low-pass filtering for DI
  • PCI-7250 extendable up to 32-CH relay outputs & 32-CH DI with three PCI-7251
      |  Datasheet |         

  Software Support  
  Ordering Information  
ADLINK's PCI-7250/7251 provide 4-CH SPDT (Form C) & 4-CH SPST (Form A) relay outputs and 8-CH isolated digital inputs. The status of each relay output is represented by an onboard LED. When the relay is in SET condition, its corresponding LED will turn ON, and on the contrary, it is OFF. All digital input channels are nonpolarity, optically isolated, and may be set to use RC filter or not. The devices are suitable for collecting digital inputs in noisy environments. The PCI-7251 is an 8-CH relay outputs and 8-CH isolated DI extension card of the PCI-7250. All the I/O functions of PCI-7251 are the same as those of the PCI-7250. The PCI-7251 has to be connected with PCI-7250 and the bus interface is controlled by the PCI-7250. Up to three PCI-7251 cards can be connected to one PCI-7250, therefore, expanding the PCI-7250's DIO from 8 DIO to maximum 32 DIO.

Get a Quote

ADLINK Facebook ADLINK Google Plus ADLINK Twitter ADLINK Linkedin    Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.