Features
- Supports a 32-bit 5 V PCI bus
- 12-bit A/D and sampling rate up to 110kS/s
- 16-CH single-ended or 8-CH differential inputs
- On-board A/D FIFO
- Bipolar or unipolar analog input ranges
- 16-CH TTL DI and 16-CH TTL DO
- 2-CH 12-bit multiplying analog outputs
|
|
Introduction
 Related links:
- Find DAQ Software Solutions
- ADLINK recommends the new PCI-9222 16-CH 16-bit 250 KS/s Multi-Function DAQ Card.
|
|
Ordering Information | PCI-9112 | 16-CH 12-Bit 110 kS/s Multi-Function DAQ Card | | Accessory | | ACL-10137-1MM | 37-Pin D-sub male/male Cable, 1M | | DIN-37D-01 | ermination Board with a 37-pin D-sub Connector and DIN-Rail MountingTermination Board with a 37-pin D-sub Connector and DIN-Rail Mounting (without cable)  |
|
Associated Software
| DAQBench V2.44 Run Time (Free for download) | DAQBench 2.44 Run-Time License (Free for download) | | DAQBench V2.44 | V2.44,ActiveX Controls for Measurement and SCADA/HMI | | PCI-OCX V4.22 | V4.22,ActiveX Controls for ADLINK PCI/PCI Express(R)/cPCI Series Data Acquisition Cards | | DAQ-LVIEW PnP V1.30 | V1.30,LabVIEW™ Interface for all ADLINK PCI/PCI Express(R)/cPCI Series Data Acquisition Cards | | PCIS-VEE V3.21 | V3.21,VEE ™ Interface for ADLINK PCI/cPCI Series Data Acquisition Cards | | DAQ-MTLB V1.3 | V1.3,MATLAB Data Acquisition Toolbox Adapter for ADLINK DAQ Cards | | DAQMaster V1.53 | DAQMaster V1.53,Configuration-Based Device Manager for ADLINK DAQ Cards | | AD-Logger V1.11 | Configuration-based Data Logger for ADLINK DAQ cards (30 Days Trial Version 1.11) (Build 1.11) |
|
|
 |
| [+] Enlarge Picture |
|
|
|
;){kind=link}