PCI-8124-C - Motion Control - Encoder & Trigger - ADLINK Technology
ADLINK Home > Products > Motion Control > Encoder & Trigger > PCI-8124-C
ADLINK-PCI-8124-C-Motion Control-Encoder & Trigger


Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote

PCI-8124-C

 Get a Quote  Datasheet
Advanced 4-CH Encoder Card with High-speed Triggering Function

Features
  • 32-bit PCI bus, Rev. 2.2, 33 MHz
  • Card index switch selection
  • Encoder input interface: OUT/DIR, CW/CCW, and 1x, 2x, 4x A/B phase
  • Trigger output up to 5 MHz; encoder input up to 20 MHz
  • Programmable trigger pulse width: 0.2 us to 6.5 ms
  • Input/Output circuit source can be selectable: TTL/Open
  • Internal high-speed FIFO for four 32-bit comparators as data
  • Each channel can store 1024 points (32-bit)
      |  Datasheet |         

  Introduction  
  Ordering Information  
PCI-8124-C is a 4-CH trigger board which is suitable for advanced line scan application which need high line rates. PCI-8124-C has internal FIFO to realize the high speed position compare and trigger pulse output. The frequency can be up to 30 kHz. For this application, ADLINK proposes you can use PCI-8134 and PCI-8124-C together to gain the advantage of motion control and high speed trigger function. For position compare, PCI-8124-C provides two method: linear function or variable interval. PCI-8124-C also provides the variety of mapping function between comparator and trigger output. The comparator condition can be associated with latch signal, TTL input and EA/EB signal.


Get a Quote


ADLINK Facebook ADLINK Google Plus ADLINK Twitter ADLINK Linkedin    Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.