• Ultra Low Power CPU GX533 @ 1.1 Watt or GX466 @ 0.9 Watt
• Optional 128 or 256 MB of soldered DDR memory
• Compact Flash socket onboard
• IDE, Ethernet, USB , 2S1P, IrDA, KB/MS, AC97
• Serial Console, EEPROM CMOS backup, PXE support
• ROHS Compliant / Leadfree

ETX-GX2 is an RoHS compliant ETX module specially designed to facilitate speedy development of semi custom designs. The ETX-GX2 core consists of an AMD Geode™ GX2 processor and AMD Geode™ CS5535 companion device. The GX2 CPU onboard is available in two version : as a Geode GX533@1.1W or as a Geode GX466@0.9W The ETX-GX2 supports DDR based SODIMMs. Memory can be soldered on board as either 128MB or 256MB, and/or can be inserted in the onboard 200-pin SODIMM socket that accept up to 512 MB DDR SODIMMs. The ETX-GX2 incorporates a VGA controller, an single channel EIDE controller supporting both PIO and UDMA modes, 4 USB ports, two serial ports, one parallel port (SPP/ECP/EPP) shared with FDD, one PS2 keyboard/mouse interface. Additionally onboard are an 10/100Base-T Ethernet port, watchdog timer, an AC97 Audio Codec and support for LVDS based Flat Panel displays.

Ordering Information

ETX-GX2-466/0	ETX® module with AMD Geode™ GX466
ETX-GX2-533/0	ETX® module with AMD Geode™ GX533
ETX-GX2-533/128	ETX® module with AMD Geode™ GX533 and 128MB DDR soldered memory
ETX-GX2-533/256	ETX® module with AMD Geode™ GX533 and 256MB DDR soldered memory
ETX-GX2-466/128	ETX® module with AMD Geode™ GX466 and 128 MB DDR soldered memory
ETX-GX2-466/256	ETX® module with AMD Geode™ GX466 and 256MB DDR soldered memory
ETX-Proto	ETX Prototype / Evaluation board
HTS-GX2	Heatspreader for ETX-GX2 with threaded standoffs