• Intel® Pentium® M or Celeron® M processor
• Up to 1GB DDR333 SDRAM
• Intel® Extreme Graphics 2, dual channel 18-bit LVDS
• IDE, Ethernet, USB 2.0, COM, LPT, IrDA, KB/MS, AC97
• Serial Console, EEPROM CMOS backup, USB boot/legacy, PXE support

The ETX-IM333 is based on Intel's embedded 855GME Northbridge and ICH4 Southbridge. It supports the Celeron® M and Pentium® M (Banias/Dothan) processors at clock speeds ranging from 600 MHz to 2.0 GHz. This CPU/chipset combination is ideal for applications that require high performance, reliability, and long product availability. The Intel® 855GME Chipset graphics and memory controller hub (GMCH) provides integrated graphics capabilities and power saving features. The 855GME Northbridge supports DDR333 in addition to DDR266/200 memory for up to 1GB in a single 200-pin SODIMM socket and provides graphics support for CRT and single/dual channel 18-bit LVDS displays. The integrated EIDE controller supports both PIO and UDMA modes, USB 2.0, two serial ports, one parallel port (SPP/ECP/EPP), one PS/2 keyboard/mouse interface, AC'97 audio interface, Fast Ethernet LAN controller, and power management functionality.

Ordering Information

ETX-IM333-S	ETX Module with socket for Intel® Pentium® M / Celeron® M Processor
ETX-IM333-C0600	ETX Module with ULV Intel® Celeron® M Processor at 600MHz
ETX-IM333-C1000	ETX Module with LV Intel® Celeron® M 373 Processor at 1.0GHz
ETX-IM333-P1400	ETX Module with LV Intel® Pentium® M 738 Processor at 1.4GHz
HTS-IM333-B	Heatspreader for ETX-IM333 or ETX-IM266 with threaded standoffs (for BGA type only))
THSF-IM333-S	Heatsink with fan for ETX-IM333 or ETX-IM266 with socket CPU and threaded standoffs with mounting screws
THS-IM333	Low Profile Heatsink for ETX-IM333 (BGA CPU) withthreaded standoff
ETX-Proto	ETX Reference Carrier Board