cPCI-6510 - CompactPCI/PlusIO - 6U CompactPCI Blades - ADLINK Technology
ADLINK Home > Products > CompactPCI/PlusIO > 6U CompactPCI Blades > cPCI-6510
ADLINK-cPCI-6510-CompactPCI/PlusIO-6U CompactPCI Blades

Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote


 Get a Quote  Datasheet
6U CompactPCI® Intel® Core™ i7 Universal Blade with two PMC sites

  • 32nm Intel® Core™ i7 SV, LV, ULV processors with ECC
  • Up to 8GB DDR3-1066 ECC soldered memory
  • Two 64-bit/133MHz PMC sites with rear I/O
  • One PCI-Express x8 XMC site
  • Optional dual DVI ports for independent displays
      |  Datasheet |         

  Ordering Information  
The cPCI-6510 Series is a 6U CompactPCI single board computer in single slot width (4HP) form factor supporting 32nm Intel® Core™ i7 SV, LV, ULV processors with integrated graphics and ECC memory controller onboard. The cPCI-6510 provides up to 8GB of dual channel DDR3-800/1066 ECC memory soldered onboard and implements the Mobile Intel® QM57 Express Chipset to provide a full feature set and optimal performance per watt.

The cPCI-6510 Series provides a 64bit/66MHz CompactPCI bus, up to two PMC sites with 64-bit/133MHz PCI-X bus supporting rear I/O (PIM), and one PCI Express x8 XMC site (shared with inner PMC site). Featured I/O includes four PCI Express Gigabit Ethernet ports (two on front panel, two for PICMG 2.16), two USB ports and a CompactFlash socket. DVI-I, COM and additional USB ports are available on the cPCI-6510V version which also provides a SATA connector for an onboard 2.5" SATA HDD.

Optional Rear Transition Modules provide versatile additional I/O including two additional GbE, USB, COM, High Definition Audio, and storage interfaces such as SATA, SCSI, and SAS with RAID support. The cPCI-6510V supports dual independent display via two DVI or one DVI and one VGA when accompanied by the appropriate Rear Transition Module. For flexibility of use, the cPCI-6510 Series can be installed in a standard CompactPCI system slot as system master, or peripheral slot as a PCI device. Through hardware switch setting, the cPCI-6510 optionally supports operation in system or peripheral slots as a standalone blade. The cPCI-6510 Series is ideally suited for military, aviation, communication and other industrial applications.

Get a Quote

   Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.