The cPCI-6510 Series is a 6U CompactPCI single board computer in single slot width (4HP) form factor supporting 32nm Intel® CoreTM i7 SV, LV, ULV processors with integrated graphics and ECC memory controller onboard. The cPCI-6510 provides up to 8GB of dual channel DDR3-800/1066 ECC memory soldered onboard and implements the Mobile Intel® QM57 Express Chipset to provide a full feature set and optimal performance per watt.
The cPCI-6510 Series provides a 64bit/66MHz CompactPCI bus, up to two PMC sites with 64-bit/133MHz PCI-X bus supporting rear I/O (PIM), and one PCI Express x8 XMC site (shared with inner PMC site). Featured I/O includes four PCI Express Gigabit Ethernet ports (two on front panel, two for PICMG 2.16), two USB ports and a CompactFlash socket. DVI-I, COM and additional USB ports are available on the cPCI-6510V version which also provides a SATA connector for an onboard 2.5" SATA HDD.
Optional Rear Transition Modules provide versatile additional I/O including two additional GbE, USB, COM, High Definition Audio, and storage interfaces such as SATA, SCSI, and SAS with RAID support. The cPCI-6510V supports dual independent display via two DVI or one DVI and one VGA when accompanied by the appropriate Rear Transition Module.
For flexibility of use, the cPCI-6510 Series can be installed in a standard CompactPCI system slot as system master, or peripheral slot as a PCI device. Through hardware switch setting, the cPCI-6510 optionally supports operation in system or peripheral slots as a standalone blade. The cPCI-6510 Series is ideally suited for military, aviation, communication and other industrial applications.
6U CompactPCI® blade with Core™ i7 610E 2.53GHz and 4GB DDR3-1066 ECC soldered onboard memory, dual PMC sites
6U CompactPCI® blade with Core™ i7 610E 2.53GHz and 8GB DDR3-1066 ECC soldered onboard memory, single PMC site
6U CompactPCI® blade with Core™ i7 620LE 2.0GHz and 4GB DDR3-1066 ECC soldered onboard memory, single PMC site
6U CompactPCI® blade with Core™ i7 620LE 2.0GHz and 4GB DDR3-1066 ECC soldered onboard memory, single PMC site and -20°C to +70°C operating
6U CompactPCI® blade with Core™ i7 620LE 2.0GHz and 4GB DDR3-1066 ECC soldered onboard memory, single PMC site and -40°C to +80°C operating
4HP Rear I/O module with GbE x2, COMx2, USB x3, SATA x2, DVI-I
4HP Rear I/O module with GbE x4, COM, USB x4, SATAx2, DVI, VGA, PS/2, CF, SD socket
4HP Rear I/O module with GbE x2, USB x4, SATA x3, VGA, PS/2, CF, SD socket
4HP Rear I/O module with discrete GPU ATI/AMD E4690, DVI-I x2, GbE x2, USB x3, COM x2, KB/MS hearder, SATA x3, audio header
8HP Rear I/O module with GbE x2, USB x6, DVI-I, SATA x3, Mic-in, Line-out, PS/2 KB/MS, SAS x8
4HP Rear I/O module with USB x2, DVI-I, PIM x2, COM x1, SATA x2
CompactFlash socket adapter card (for cPCI-R6110 and cPCI-R6200)