ND-6530 - Distributed I/O - Remote I/O - ADLINK Technology
ADLINK Home > Products > Distributed I/O > Remote I/O > ND-6530
ADLINK-ND-6530-Distributed I/O-Remote I/O


Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote

ND-6530

 Get a Quote  Datasheet
USB to RS-422/RS-485 Converter

Features
  • Protocol (DIP switch selectable): RS-232 (5-wire: RXD, TXD, RTS, CTS, GND); RS-422 (4-wire: TX+, TX-, RX+, RX-); RS-485 (2-wire: Data+, Data-)
  • Speed: 300~115.2k bps
  • Isolation Voltage: 2500 VRMS
  • Fully USB compliant
  • Repeater request: Over 128 modules or distance over 4000 feet
      |  Datasheet |         

  Introduction  
  Ordering Information  
ADLINK's NuDAM data acquisition modules make up a total acquisition network and control system. Up to 256 NuDAM modules an be romotely controlled on any RS-485 network from a host computer, via a single serial RS-232, allowing communication from as far as 4000 feet from the host. Based on the RS-485 multi-drop network system, each module has a unique address ID, whereby simple ASCII command & response protocols through the standard RS-485 interface can control all the NuDAM modules in the RS-485 network. The NuDAM modules provide direct communications with a wide variety of sensors, perform all signal conditioning, scaling, linearization and conversion, and can acquire measurements of temperature, pressure, flow, voltage, current, and multiple digital signal types.


Get a Quote


   Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.