ND-6510 - Distributed I/O - Remote I/O - ADLINK Technology
ADLINK Home > Products > Distributed I/O > Remote I/O > ND-6510
ADLINK-ND-6510-Distributed I/O-Remote I/O


Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote

ND-6510

 Get a Quote  Datasheet
RS-422/RS-485 Repeater

Features
  • Input: RS-422 (4-wire, full-duplex); RS-485 (2-wire, half-duplex) protocol
  • Output: RS-422 (4-wire, full-duplex); RS-485 (2-wire, half-duplex) protocol
  • Speed: 115.2k, 57.6k, 38.4k, 19.2k, 9600, 4800, 2400, 1200, 600, 300
  • Auto baud rate and data format adjustment
  • Isolation Voltage: 2500 VRMS
      |  Datasheet |         

  Introduction  
  Ordering Information  
ADLINK's NuDAM data acquisition modules make up a total acquisition network and control system. Up to 256 NuDAM modules an be romotely controlled on any RS-485 network from a host computer, via a single serial RS-232, allowing communication from as far as 4000 feet from the host. Based on the RS-485 multi-drop network system, each module has a unique address ID, whereby simple ASCII command & response protocols through the standard RS-485 interface can control all the NuDAM modules in the RS-485 network. The NuDAM modules provide direct communications with a wide variety of sensors, perform all signal conditioning, scaling, linearization and conversion, and can acquire measurements of temperature, pressure, flow, voltage, current, and multiple digital signal types.


Get a Quote


ADLINK Facebook ADLINK Google Plus ADLINK Twitter ADLINK Linkedin    Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.