Features
- 4-CH strain gauged-based transducer inputs
- Up to 30kS/s sampling rate
- Transducer input accuracy up to 1/200,000 counts at full-scale
- 4-CH 24-bit general-purpose analog input
- 3-CH PWM output, supporting single pulse and pulse train
- 3-CH encoder inputs, supporting CW/CCW & AB phase
- 2-CH 16-bit analog outputs
- Auto-calibration feature
|
|
Introduction
The PCI-9524 is a robust, multi-purpose module designed for turnkey material test systems (MTS). Equipped with four strain gauge-based transducer input channels, four general purpose analog input channels, and a 3-axis
motion controller, the PCI-9524 delivers a complete hardware solution for MTS manufacturers. The PCI-9524 easily integrates physical quantity measurement and implements strategy of close-loop control in a single module package. For transducer measurement, the PCI-9524 supports sensitivity from 1.0 mV/V to 4.0 mV/V and provides a 1/200000 accuracy of measurement of full scale. These features make the PCI-9524 suitable for
precise measurement in large-scale transducers.  Related links:
- Find DAQ Software Solutions
- Application Note: Automatic Material Testing Using a 24-bit High-Precision Load Cell Input Card
|
|
Ordering Information | PCI-9524 | 24-bit Precision Load Cell Input Card | | Accessory | | DIN-68S-01 | Termination Board with a 68-pin SCSI-II Connector and DIN-Rail Mounting (without cable)  | | ACL-10568-1 | 68-Pin SCSI-VHDCI Cable, 1M | | ACL-10568-3 | 68-Pin SCSI-VHDCI Cable, 3M |
|
Associated Software
| DAQ-MTLB V1.3 | V1.3,MATLAB Data Acquisition Toolbox Adapter for ADLINK DAQ Cards | | DAQMaster V1.53 | DAQMaster V1.53,Configuration-Based Device Manager for ADLINK DAQ Cards | | AD-Logger V1.11 | Configuration-based Data Logger for ADLINK DAQ cards (30 Days Trial Version 1.11) (Build 1.11) |
|
|
 |
| [+] Enlarge Picture |
|
|
|
;){kind=link}