PMC-8246 - CompactPCI/PlusIO - CompactPCI Peripherals & Accessories - ADLINK Technology
ADLINK Home > Products > CompactPCI/PlusIO > CompactPCI Peripherals & Accessories > PMC-8246
ADLINK-PMC-8246-CompactPCI/PlusIO-CompactPCI Peripherals & Accessories

Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote


 Get a Quote  Datasheet
Dual-Gigabit Ethernet PCI-X - PMC Module with Failover Function

  • Dual-Gigabit Ethernet ports
  • Supports PCI-X bus up to 133 MHz
  • Failover capability during system power off or software halt
  • Software programmable failover control
  • DIP Switch selectable failover control
  • Programmable watchdog timer, WDT status read-back
  • Intel® - PMC Module Boot Agent BIOS
      |  Datasheet |         

PMC-8246 is a high performance 2-port Gigabit Ethernet (GbE) PCI-X PMC module providing bypass capability, which can connect GbE signals on the two GbE connectors while the system is powered down or under software halt.

The PMC-8246 is based on the Intel 82546GB dual port Gigabit Ethernet controller. The Intel 82546GB is a highly integrated chip, includes Ethernet MAC, PHY, and provides PCI-X 133MHz capability. Please refer to the Intel 82546GB datasheet for more information on the GbE ports.

The PMC-8246's bypass capability uses a mechanical relay array to control the physical routing of the GbE signals. There are two communications states for the GbE signal routing: 1) Normal State, 2) Bypass State. Please refer to section 1.4 for block diagrams of the two states.

Watchdog timer (WDT) and bypass control logic circuits are used to control the relay and communication states. The programmer can control those functions via the Software Definable Pins (SDP) on the Intel 82546GB by programming its registers. Please refer to section 1.5 for a block diagram of the bypass control circuits.

Get a Quote

   Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.