Features
- Supports universal 32-bit 3.3 V and 5 V PCI
- 64-CH opto-isolated digital input and 64-CH opto-isolated digital output (PCI-7442)
- 128-CH opto-isolated digital input(PCI-7443)
- 128-CH opto-isolated digital output (PCI-7444)
- 1250 VRMS isolation voltage
- Programmable Change-of-State (COS) detection for all digital input channels
- Voltage protection of up to 28 V for isolated input
- Up to 300 mA high-output driving capability for all output
|
|
Introduction
Responding to the industry's need for high-density digital input/output modules, the ADLINK PCI-7442/7443/7444 DIO card series delivers up to 128 opto-isolated channels for a wide range of demanding PCI-based applications. The PCI-7442/7443/7444 series comes with 64 (PCI-7442) or 128 (PCI-7443) opto-isolated digital inputs and 64 (PCI-7442) or 128 (PCI-7444) opto-isolated digital outputs. With a 1250 VRMS (excluding cables)
channel-to-system isolation protection, these cards are shielded from damage caused by accidental contact with external voltage while promoting simple ground connections. All input channels are identical non-polarity with each line isolated and suited to collect digital inputs even at high-noise environments. Featuring a Change-of-State (COS) interrupt function, the PCI-7442/PCI-7443 instantly
generates an interrupt request to the PCI controller when it detects a sharp change in the logical state of any of its digital inputs.
|
|
Ordering Information | PCI-7442 | 64-CH Isolated DI and 64-CH Isolated DO Card | | PCI-7443 | 128-CH Isolated DI card | | PCI-7444 | 128-CH Isolated DO card | | Accessory | | DIN-68S-01 | Termination Board with a 68-pin SCSI-II Connector and DIN-Rail Mounting (without cable), 4 units are needed for 7442/7443/7444  | | ACL-10568D-1 | Dual-68-Pin Head to Two 68-pin SCSI-VHDCI Cable, 1M; 2 pcs are needed for 7442/7443/7444 |
|
Associated Software
| DAQBench V2.44 Run Time (Free for download) | DAQBench 2.44 Run-Time License (Free for download) | | DAQBench V2.44 | V2.44,ActiveX Controls for Measurement and SCADA/HMI | | PCI-OCX V4.22 | V4.22,ActiveX Controls for ADLINK PCI/PCI Express(R)/cPCI Series Data Acquisition Cards | | DAQ-LVIEW PnP V1.30 | V1.30,LabVIEW™ Interface for all ADLINK PCI/PCI Express(R)/cPCI Series Data Acquisition Cards | | PCIS-VEE V3.21 | V3.21,VEE ™ Interface for ADLINK PCI/cPCI Series Data Acquisition Cards | | DAQ-MTLB V1.3 | V1.3,MATLAB Data Acquisition Toolbox Adapter for ADLINK DAQ Cards | | DAQMaster V1.53 | DAQMaster V1.53,Configuration-Based Device Manager for ADLINK DAQ Cards | | AD-Logger V1.11 | Configuration-based Data Logger for ADLINK DAQ cards (30 Days Trial Version 1.11) (Build 1.11) |
|
|
 |
| [+] Enlarge Picture |
|
|
|
;){kind=link}