ETX-Proto - Computer-on-Modules - ETX-Carrier Board - ADLINK Technology
ADLINK Home > Products > Computer-on-Modules > ETX-Carrier Board > ETX-Proto
ADLINK-ETX-Proto-Computer-on-Modules-ETX-Carrier Board


Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote

ETX-Proto

 Get a Quote  Datasheet
ETX® Reference Carrier Board in ATX Form Factor

Features
  • Four PCI slots, three ISA slots, one Mini PCI slot
  • POST code diagnostics
  • Secondary Multi I / O
  • Disk-On-Chip and CF Card support
  • Audio amplifier
      |  Datasheet |         

  Introduction  
  Ordering Information  
The ETX-Proto is an ETX Reference Carrier Board in standard ATX form factor. Together with the ETX module of your choice and off-the-shelf add-on cards, you can quickly emulate the functionality of your desired end product for software development and hardware verification. The ETX concept has a great many advantages over full custom designs. It reduces engineering complexity, lowers the threshold for total project quantity and last but not least brings your product to the market in no time.

To build a functional prototype of your target system you will need: an ETX module; an ETX-Proto Reference Carrier Board; ISA, PCI or Mini PCI add-on cards; storage or flash disk solution. The ETX Proto supports up to 4 PCI add-on cards and 3 ISA cards. In addtion to the functions on the ETX module it adds the following functionality: Secondary I/O for COM3/4 and LPT2; secondary hardware monitor; PCI based debug display for POST code readout; I2C based GPIO; Audio Amplifier.


Get a Quote


   Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.