PCM-7248+ - Data Acquisition - PC/104 DAQ Cards - ADLINK Technology
ADLINK Home > Products > Data Acquisition > PC/104 DAQ Cards > PCM-7248+
ADLINK-PCM-7248+-Data Acquisition-PC/104 DAQ Cards


Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote

PCM-7248+

 Get a Quote  Datasheet
PC/104-Plus 48-CH Opto-22 Compatible DIO Module

Features
  • PC/104-Plus specifications Rev. 1.2 compliant
  • 48-CH TTL/DTL digital inputs/outputs
  • Emulates 2 industry standard 8255 PPI (mode 0)
  • Buffered circuits for higher driving capacity
  • Direct interface with OPTO-22 compatible I/O modules
  • Known power-up states
  • Output port status read back
  • 1-CH 32-bit timer for timed interrupt generation
      |  Datasheet |         

  Introduction  
  Software Support  
  Ordering Information  
ADLINK PCM-7248+ is a 48-bit parallel digital input/output (DIO) module for PC/104-Plus form factor. The header connectors are fully compatible with the industry opto-22 standard. The PCM-7248+ emulates mode 0 of industry standard 8255 Programmable Peripheral Interface (PPI) chips. Each PPI offers three 8-bit ports, Port A, Port B and Port C. The Port C is divided into 2 nibble-wide (4-bit) ports. The total 6 ports can be configured as input or output independently. The PCM-7248+ device has programmable timers/counters. One 16-bit counter is available for event counting, while the other 32-bit timer is available for timed interrupt generation. The PCM-7248+ device provides multiple programmable interrupt sources from DIO channels, as well as the output of the timer.


Get a Quote


   Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.