Features
- Supports a 32-bit 5 V PCI bus
- 24/48/96-CH digital TTL/DTL inputs/outputs
- Emulates 4/2/1 industry standard 8255 PPI (mode 0)
- Direct interface with OPTO-22 compatible I/O modules
- Output port status read back
- On board 8254 timer/counter chip
- Programmable interrupt source
- Provides 12V and 5V power supply to OPTO-22
|
|
Introduction
ADLINK's PCI-7296/7248/7224 are high-density parallel digital I/O boards with 96/48/24 I/O channels. The header connectors are fully compatible with industry Opto-22 standard. Thus, PCI-7296/48/24 can utilize the Opto-22 external
devices. The PCI-7296/7248/7224 devices emulate mode 0 of the industry standard 8255 programmable peripheral interface (PPI) chips. The PCI-7296/7248/7224 provides 4/2/1 PPI chips respectively. Each PPI offers three 8-bit
ports: Port A, Port B and Port C. The Port C is divided into 2 nibble-wide (4-bit) ports. The PCI-7296/7248/7224 devices have programmable timer/counters. One 16-bit counter is available for event counting, while the other 32-bit timer is available for timed interrupt generation.
The PCI-7296/7248/7224 devices provide multiple programmable interrupt sources from DIO channels, as well as the output of the timer. Related links:
- PCI/PCIe/cPCI version are available!
|
|
Ordering Information | PCI-7296 | 96-CH Opto-22 Compatible DIO Card | | PCI-7248 | 48-CH Opto-22 Compatible DIO Card | | PCI-7224 | 24-CH Opto-22 Compatible DIO Card | | Accessory | | TB-24R-01 | Terminal Board with 24-CH Relay Outputs | | TB-24P-01 | Terminal Board with 24-CH Isolated Digital Inputs | | TB-16P8R-01 | Terminal Board with 16-CH Isolated DI & 8-CH Relay Outputs | | DIN-24R-01 | Terminal Board with 24-CH Relay Outputs | | DIN-24P-01 | Terminal Board with 24-CH Isolated Digital Inputs and DIN-Rail Mounting |
|
Associated Software
| DAQBench V2.44 Run Time (Free for download) | DAQBench 2.44 Run-Time License (Free for download) | | DAQBench V2.44 | V2.44,ActiveX Controls for Measurement and SCADA/HMI | | PCI-OCX V4.22 | V4.22,ActiveX Controls for ADLINK PCI/PCI Express(R)/cPCI Series Data Acquisition Cards | | DAQ-LVIEW PnP V1.30 | V1.30,LabVIEW™ Interface for all ADLINK PCI/PCI Express(R)/cPCI Series Data Acquisition Cards | | PCIS-VEE V3.21 | V3.21,VEE ™ Interface for ADLINK PCI/cPCI Series Data Acquisition Cards | | DAQ-MTLB V1.3 | V1.3,MATLAB Data Acquisition Toolbox Adapter for ADLINK DAQ Cards | | DAQMaster V1.53 | DAQMaster V1.53,Configuration-Based Device Manager for ADLINK DAQ Cards | | AD-Logger V1.11 | Configuration-based Data Logger for ADLINK DAQ cards (30 Days Trial Version 1.11) (Build 1.11) |
|
|
 |
| [+] Enlarge Picture |
|
|
|
;){kind=link}