Rotary Machine Condition Monitoring Starter Kit - Data Acquisition - USB DAQ - ADLINK Technology
ADLINK Home > Products > Data Acquisition > USB DAQ > Rotary Machine Condition Monitoring Starter Kit
ADLINK-Rotary Machine Condition Monitoring Starter Kit-Data Acquisition-USB DAQ
[+] Enlarge Picture


Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote

Rotary Machine Condition Monitoring Starter Kit

 Get a Quote
The Starter Kit contains 24-bit 4CH dynamic signal acquisition module and Phoenix GM Lite Rotary machine condition monitoring utility

Features
  • Easily set up, ready-to-go starter kit for rotary machines
  • USB bus power requires no additional power supply
  • 4CH simultaneous sampling at pre-defined intervals(min. 60 seconds)
  • Automatic OA (overall) calculation of displacement, velocity and acceleration
  • Real-time display of acceleration waveform and FFT
  • Threshold settings for conditions user-defined or by default with ISO 10816 machinery vibration standards
  • Quick attachment of accelerometer to the rotary device with integral magnetic mount means no adapter or additional fastening is required
      | Quick Start Guide | Other Documents |        

  Introduction  
  Feature  
  Software  
  Starter kit   
  Ordering Information  
All-in-one starter kit provides cost-effective solution for 24/7 online monitoring and failure prediction.Quick attachment of accelerometer to the rotary device with integral magnetic mount means no adapter or additional fastening is required.

Integral Accelerometer Mounting Magnet
The Accelerometer included in the ADLINK Starter Kit, provides frequencies from 0.5 to 10kHz and a maximum amplitude of 50G. Perfect for rotating machinery condition monitoring, the accelerometer attaches magnetically, allowing easy adjustment of location to any test point, avoiding costs and effort of non-returnable tapping meters.

Start Projects Anywhere
ADLINK USB-2405 4-CH 24-Bit DSA Module is intuitive and easy to use for microphone and accelerometer measurement in vibration and acoustic applications with compelling features including built-in IEPE 2mA excitation current source on each channel without additional signal conditioning, and anti-aliasing filters enable cutoff frequency to be automatically adjusted to the sampling rate, suppressing out-of-band noise. In addition, the USB-2405's USB bus power makes it perfect for portable field measurement when used with laptop.

>

Efficient, Easy, Machine Condition Monitoring Application
Phoenix GM Lite Software monitors and analyzes rotating machinery, calculating different overall (OA) bandwidths and condition data and generating alerts when predefined alarm and condition parameters are exceeded. Threshold settings can be user-defined or by default with ISO 10816 machinery vibration standards.

Phoenix GM Lite Rotary Machine Condition Monitoring Application

  • 4CH simultaneous sampling at pre-defined intervals (min. 60 seconds)
  • Automatic OA (overall) calculation of displacement, velocity, and acceleration
  • Real-time display of acceleration waveform and FFT
  • Threshold settings for conditions user-defined or by default with ISO 10816 machinery vibration standards
  • Trend display and report generation
  • Efficient raw data storage:
    Below alarm level: recording OA only
    Exceeding alarm level: recording raw data for further analysis


System Requirements
  • Microsoft® Windows® 7, Server 2012®, Windows 8®,Windows 8.1® and above
  • Microsoft® Office® 2010 and above
  • Intel® Pentium® 4 or 933 MHz CPU and above
  • RAM 512MB and above
  • Mouse
  • USB port
Starter Kit Contains:
  • USB-2405 (24-bit 4-CH USB D SA)
  • Phoenix GM Lite machine condition monitoringutility license(Microsoft® Windows based)
  • Accelerometer (PCB 603C01)
  • 10 ft cable for acceleromet er
  • Mounting magnet


Get a Quote


ADLINK Facebook ADLINK Google Plus ADLINK Twitter ADLINK Linkedin    Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.