cPCI-6S10 - CompactPCI/PlusIO - 6U CompactPCI Blades - ADLINK Technology
ADLINK Home > Products > CompactPCI/PlusIO > 6U CompactPCI Blades > cPCI-6S10
ADLINK-cPCI-6S10-CompactPCI/PlusIO-6U CompactPCI Blades
[+] Enlarge Picture


Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote

cPCI-6S10

 Get a Quote  Datasheet
6U CompactPCI 10 Gigabit Ethernet Switch Blade

Features
  • 24-port fully managed Gigabit Ethernet switch
  • ARM Cortex-A9 processor integrated in Broadcom BCM56150 switch
  • Layer 2/3 switching with advanced support for VLANs, QoS and IPv6
  • Two 10 Gigabit Ethernet SFP+ uplink ports
  • Supports IPMI based on PICMG 2.9 (System Management Specification)
  • Pre-installed ADLINK PacketManager accelerates packet processing
      |  Datasheet |      

  Introduction  
  Ordering Information  
Conforming to the PICMG 2.16 specification, the ADLINK cPCI-6S10 is a fully-managed CompactPCI Gigabit Ethernet switch blade supporting up to twenty four 1GbE ports and two 10GbE SPF+ uplink ports. On the front panel are three GbE ports, two 10GbE SFP+ uplink ports, one COM port and one 10/100 RJ-45 management port. Twenty GbE ports are routed to rear I/O and an IPMI interface is provided to monitor and control system health.

The ADLINK cPCI-6S10 integrates Broadcom BCM56150 switch silicon with built-in ARM Cortex-A9 processor and one Broadcom BCM54685 Octal port 1000BASE-T PHY. The cPCI-6S10 is ideal for CompactPCI platform adopters who require high-speed and high-bandwidth data transport interconnects for packet switching management.

The ADLINK cPCI-6S10 supports ADLINK PacketManager, a software suite with an extensive feature set and integration capabilities that enables powerful networking functionality for the Base Interface. It supports friendly CLI(Command Line Interface) for customer easy management and provides comprehensive device management capabilities for network administrators. The cPCI-6S10 bundled PacketManager supports port management, LACP(IEEE802.3ad Link Aggregation Control Protocal), STP (IEEE802.1D Spanning Tree Protocal), VLAN management, ACL (Access Control List) and QoS (Quality of Service).

Designed to meet the needs of various challenging applications in industrial and military systems, the ADLINK cPCI-6S10 facilitates communications within a chassis and outside of chassis. It supports redundancy based on PICMG 2.16 specification to be used for mission critical environment supporting IPMI v1.5 and extended temperature configuration on request.


Get a Quote


ADLINK Facebook ADLINK Google Plus ADLINK Twitter ADLINK Linkedin    Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.