CM3-BT1 - Rugged Small Form Factor SBCs and Systems - PCI/104 - ADLINK Technology
ADLINK Home > Products > Rugged Small Form Factor SBCs and Systems > PCI/104 > CM3-BT1
ADLINK-CM3-BT1-Rugged Small Form Factor SBCs and Systems-PCI/104
[+] Enlarge Picture

ADLINK Smart Embedded Management Agent


Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

CM3-BT1

Request Information  Datasheet
Extreme Rugged™, PCI-104 Single Board Computer with Intel® Atom™ Processor E3800 Series SOC

Features
  • Single, dual or quad-core Intel® Atom™ or Celeron® Processors
  • Up to 4GB DDR3L at 1333MHz
  • Supports VGA and LVDS
  • GbE, 1x SATA 3Gb/s
  • 1x USB 3.0 + 2x USB 2.0, 8x GPIO
  • Extreme Rugged™ operating temperature: -40°C +85°C
  • Supports Smart Embedded Management Agent (SEMA) functions
      |  Datasheet |  Other Document |        

  Introduction  
  SEMA  
  SEMA Cloud  
  Extreme Rugged  
  Ordering Information  
The ADLINK CM3-BT1 with built-in SEMA Cloud functionality is ready-made for Internet of Things (IoT) applications. CM3-BT1 is able to connect legacy industrial devices and other IoT systems to the cloud, extract raw data from these devices, determine which data to save locally and which to send to the cloud for further analysis. The results these analyses can provide valuable information for policy decision making and generate innovative business opportunities.

Smart Embedded Management Agent
Today’s Embedded PC Systems need to provide both optimal performance and low power consumption. This can be difficult to accomplish without adequate control and system management tools to detect potential problems before they get out of hand. Similarly, systems must run stably and continuously, particularly in critical applications and severe environments with subject to extreme shock & vibration and extended temperatures.

To meet these requirements, a tool is needed which is able to monitor and gather performance and status necessary information from the hardware in a timely, flexible and precise manner. ADLINK""""""""s Smart Embedded Management Agent (SEMA) accomplishes these goals for you, the developer and end user. Time-to-Market (TTM) and Total-Costs-of-Ownership (TCO) are key aspects to producing competitive products. To combine TTM and TCO in a reliable manner, a solid and reliable platform is fundamental. To assist in this endeavor, every new ADLINK computer-on-module (COM) and single board computer (SBCs) is equipped with a Board Management Controller (BMC) device supporting SEMA.

Initially designed for power sequencing tasks, the BMC has evolved to include many new and useful features through the years. Measuring the supply current to get a snapshot of the system??s power consumption is only one of the new capabilities. Being compatible with the latest Embedded Application Programming Interface specification (EAPI) reduces your effort to port existing calls to SEMA to nearly zero!

Interfacing the hardware to the operating system is one of SEMA""""""""s most important functions. The BMC first collects all relevant information from the chipset and other sources. Using the System Management Bus driver, the application layer fetches the data and presents it to the user. ADLINK also provides a ready-made application that shows the data in user-friendly graphic interfaces, suitable for supervision and troubleshooting. (Learn More)

An Intelligent Cloud Solution for Remote Monitoring, Management and Control

Downtime of devices or systems is not acceptable in today's industries. To help customers to analyze their systems and take counter measures for preventive maintenance, ADLINK has developed a tool which is able to monitor and collect system performance and status information from the hardware in a timely, flexible and precise manner: the Smart Embedded Management Agent (SEMA).

By combining SEMA intelligent middleware with cloud connectivity, ADLINK takes remote management technology a step further than previous generations. By employing full connectivity, from edge to cloud to end application, SEMA-enabled embedded devices can connect to the cloud without additional design requirements. Pushing data to the cloud enables operators to verify, monitor and control system performance from a single, central location improving reliability and reducing management costs.

- Manage and control all devices with one click
- Avoid system downtime with predictive maintenance
- Reduce total cost of ownership

(Learn More)
Our Rugged and Extreme Rugged™ products are developed using our Extreme Rugged™ Development Guidelines and Design Rules, and subjected to extensive voltage and temperature margin tests during the new product development process, in addition to Highly Accelerated Life Test (HALT) and shock and vibration testing. The ruggedness and reliability of the design is then validated using HALT, shock & vibration testing and voltage margining. This thorough testing regimen allows us to verify that ADLINK products meet the stringent requirements demanded by our customers.

- Highly Accelerated Life Test
- HALT
- Shock & Vibration
- Voltage and Temperature Margin Test
- Extended Temperature Testing
- Design Check
- Engineering Verification
- Pilot Run
- ETT Production Screening
- Conformal Coating
- Extended Life Cycle



Publication Download:
Rugged development requires integration of design and test from start to finish (1.99MB)




ADLINK Facebook ADLINK Google Plus ADLINK Twitter ADLINK Linkedin    Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.