ASD26-MLC / ASD26-MA2 Series - Embedded Flash Storage - 2.5 inch SSD - ADLINK Technology
ADLINK Home > Products > Embedded Flash Storage > 2.5 inch SSD > ASD26-MLC / ASD26-MA2 Series
ADLINK-ASD26-MLC / ASD26-MA2 Series-Embedded Flash Storage-2.5 inch SSD


Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

ASD26-MLC / ASD26-MA2 Series

 Datasheet
2.5

The ASD26-MLC / ASD26-MA2 Series is scheduled for discontinuation as of Nov 25, 2015, with no recommended replacement for this product.

Features
  • Sustained read up to 480 MB/s
  • Sustained write up to 410 MB/s
  • Capacity: 32, 64, 128, 256, 512 GB
  • SATA 6 Gb/s interface (ASD26-MLC)
  • SATA 3 Gb/s interface (ASD26-MA2)
  • Toshiba 24nm MLC/SLC model Toggle NAND flash
  • High IOPS (ASD26-MLC)
  • Shock and vibration resistant
      |  Datasheet |  Other Document |     

  Introduction  
  Ordering Information  
ASD26-MLC512G-CT/ASD26-MA2064-ET/ASD26-MA2032-ET have scheduled to be EOL.
Last buy date: 2015/10/01
Last shipment date: Date: 2015/11/02

The ASD26-MLC (ASD26-MLC & ASD26-MA2) series 2.5" SATA Solid State Drive (SSD) delivers leading performance in an industry standard 2.5" form factor while simultaneously improving system responsiveness for mobile applications over standard rotating drive media or hard disk drives. By combining leading NAND flash memory technology with our innovative high performance firmware, ADLINK delivers a SSD for native Serial Advanced Technology Attachment (SATA) hard disk drive drop-in replacement with enhanced performance, reliability, ruggedness and power savings. Since there are no rotating platters, moving heads, fragile actuators, or unnecessary delays due to spin-up time or positional seek time that can slow down the storage subsystem, significant I/O and throughput performance improvement is achieved as compared to rotating media or hard disk drives. This document describes the specifications of the ASD26-MLC series 2.5" SATA SSD in 2.5" form factors.

The ASD26-MLC series 2.5" SATA SSD primarily targets SATA based servers, fanless laptop PCs, highly rugged mobile client devices, as well as thin and light mini/sub-notebooks. Key attributes include high performance, low power, increased system responsiveness, high reliability, and enhanced ruggedness as compared to standard mobile SATA hard drives. The ASD26-MLC series 2.5" SATA SSD is available in a 2.5" form factor that is electrically, mechanically, and software compatible with existing 2.5" Serial ATA slots and cables. Our flexible design allows interchangeability with existing mobile hard drives based on the SATA interface standard.



ADLINK Facebook ADLINK Google Plus ADLINK Twitter ADLINK Linkedin    Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.