cPCI-6930 - CompactPCI/PlusIO - 6U CompactPCI Blades - ADLINK Technology
ADLINK Home > Products > CompactPCI/PlusIO > 6U CompactPCI Blades > cPCI-6930
ADLINK-cPCI-6930-CompactPCI/PlusIO-6U CompactPCI Blades
[+] Enlarge Picture


Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote

cPCI-6930

 Get a Quote  Datasheet
6U CompactPCI Blade with Ten-Core 22nm Intel® Xeon® Processor E5 v2

Features
  • Up to Ten-Core Intel® Xeon® E5 v2 processor
  • Up to 48GB DDR3 ECC/REG memory by RDIMMs
  • Two USB 3.0, four GbE ports on front panel
  • Optional SAS 6 Gb/s port for 2.5" drive onboard
  • Onboard SATA SSD and optional CF, CFast socket
      |  Datasheet |         

  Introduction  
  Ordering Information  
The cPCI-6930 is a 6U CompactPCI® single board computer in dual-slot (8HP) width form factor featuring a single 32nm Intel® Xeon® Processor E5-2400 v2 Series with 10/8/6/4-cores in LGA1356 socket mated with the Intel® C604 Series Platform Controller Hub. The cPCI-6930 supports three channels of DDR3-1333/1600 ECC registered SDRAM in three RDIMMs channel up to total 48GB capacity. Graphics is provided by a Silicon Motion SM750 2D GPU supporting up to 1920x1440 resolution. Four front panel 10/100/1000BASE-T ports are provided by the Intel® 82580EB Gigabit Ethernet controller.

The 8HP cPCI-6930 provides four GbE ports, one VGA port, three USB 2.0 ports, two USB 3.0 ports, one DB-9 RS-232 serial port and one 32/64-bit 133MHz PMC or PCI-Express x8 XMC site on the front panel. Onboard storage capabilities include 4GB of soldered SATA NAND flash, SATA 6 Gb/s direct connector for an onboard 2.5" drive or CFast adapter. A CompactFlash adapter is available, and onboard 2.5" SAS drive can be supported by BOM option.

A selection of optional Rear Transition Modules (RTM) provides additional I/O functionality including two GbE ports for PICMG 2.16 support, USB 2.0 ports, PS/2 keyboard/mouse port, serial ports, High Definition Audio, SATA ports, additional VGA/ DVI interfaces (dependent on selected RTM), and optional CF or SD socket. Up to eight SAS ports supporting hardware RAID via two mini-SAS x4 connectors are available when mated with the cPCI-R6200 RTM, and signals for two SAS ports are available on J5 by BOM option.

For dense computing requirements, the cPCI-6930 supports operation in both a system slot and in a peripheral slot as a standalone blade. The cPCI-6930 is compliant with the PICMG 2.9 specification and supports system management functions based on the Intelligent Platform Management Interface (IPMI) as well as hardware monitoring of physical characteristics such as CPU and system temperature, DC voltages and power status.


Get a Quote


ADLINK Facebook ADLINK Google Plus ADLINK Twitter ADLINK Linkedin    Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.