ADLINK Home > Products > Ampro Extreme Rugged > Computer-on-Modules > Product page

	[+] Enlarge Picture Contact Us  Email Us  Worldwide Offices  Where to Buy Express-IBR     Extreme Rugged™ COM Express® Type 6 Computer-on-Module with 3rd Generation Intel® Core™ Processor and QM77 Chipset Features Up to 16GB ECC 1600MHz DDR3 memory in two SODIMM sockets Three Digital Display Interfaces (DDI) for DisplayPort /HDMI/DVI/SDVO Seven PCIe x1 (Gen 2), one PCIe x16 (Gen 3) for graphics (or general purpose x8/4/1) Two SATA 6 Gb/s, two SATA 3 Gb/s, Gigabit Ethernet, eight USB 2.0, 4 USB 3.0 COM Express® COM.0 R2.0 Type 6 Pinout Extended Temperature: -40°C to +85°C 50% Thicker PCB for high vibration environments      Manual |  Datasheet |       Drivers |  Utilities |  BSP |       Introduction     Ordering Information   The Ampro by ADLINK™ Express-IBR is a COM Express® Type 6 module with quad/dual-core 3rd Generation Intel® Core™ i7/i5/i3 Processor. The Express-IBR is designed Extreme Rugged™ to support the extremes of shock, vibration, humidity, and temperature. Express-IBR-i7-R-3615QE Extreme Rugged COM Express Type 6 module with Intel® Core™ i7-3615QE 2.3GHz 45W Quad Core CPU, two DDR3 ECC SODIMMs supported Express-IBR- i7-R-3612QE Extreme Rugged COM Express Type 6 module with Intel® Core™ i7-3612QE 2.1GHz 35W Quad Core CPU, two DDR3 ECC SODIMMs supported Express-IBR-i7-R-3555LE Extreme Rugged COM Express Type 6 module with Intel® Core™ i7-3555LE 2.5GHz 25W Dual Core CPU, two DDR3 ECC SODIMMs supported Express-IBR-i7-R-3517UE Extreme Rugged COM Express Type 6 module with Intel® Core™ i7-3517UE 1.7GHz 17W Dual Core CPU, two DDR3 ECC SODIMMs supported Express-IBR-i3-R-3217UE Extreme Rugged COM Express Type 6 module with Intel ® Core™ i3-3217UE 1.6GHz 17W Dual Cor two DDR3 ECC SODIMMs supported Express-IBR-L Starterkit with 2x2GB DDR3 ECC SODIMM, non-ETTCables, BSP/driver in USB stick and manuals Accessory HTS-IBR-BTF Heat spreader for Express-IBR with through-hole standoffs for top-mounting (For use with customer supplied thermal solution) THSH-IBR-BTL Heatsink for Express-IBR with through-hole standoffs for top-mounting (For use with 17 and 25W CPUs) THSF-IBR-BTL-CU Heatsink with FAN for Express-IBR with through-hole standoffs for top-mounting (recommended for 35 and 45W CPUs) HTS-IBR-B Heat spreader for Express-IBR with threaded standoffs for bottom-mounting