ETX® Module with Dual Core Intel® Atom™ Processor and Intel® NM10 Express Chipset
Dual-Core Intel® Atom™ Processor D2550/ N2x00
Intel® NM10 Express Chipset
Up to 4GB Single Channel DDR3 SDRAM at 1066MHz
Single/Dual channel 24-bit LVDS
2 SATA 3 Gb/s, 2 IDE (PATA), LAN, 4 USB 2.0
The ETX-CV is an ETX v3.02 compliant module specially designed to facilitate speedy
development of semi custom designs. ETX is an open standard that targets the market for
embedded OEM projects. An ETX core combined with a custom made carrier board represents a
value solution that allows OEM customers to get to the market fast. The new ETX v3.02
specification adds SATA support to ETX in the form of two connectors on the module itself,
leaving the ETX board-to-board interface 100% compatible with baseboards designed under the
earlier ETX v2.xx specification.
The ETX-CV is positioned as an entry level ETX module for generic systems but also for systems
requiring a full set of graphics features. The module comes with integrated support for high VGA up to 1920 x 1200 resolution (WUXGA), single/dual channel 18/24-bit LVDS and onboard
The ETX-CV conforms to the latest ETX® 3.02 specification and provides two additional onboard SATA connectors while maintaining full backward compatibility with earlier ETX® standards.
Operating system support includes Windows XP, Windows XP Embedded, Windows 7, WinCE,and Linux. Primary focus is for applications in Medical Diagnostics and Imaging, Gaming,
Industrial Automation, Test and Measurement, POS, and Industrial Control.
The dual-core Intel® Atom™ Processor N2000 and D2000 Series on the ETX-CV replaces the
previous generation Intel® Atom™ processors N4xx/N5xx. Although much smaller in size, Intel® Atom™ processors share the same architecture as Intel® Core™2 Duo processors and additionally support Intel® Hyper-Threading Technology, allowing more than one code thread to be executed at the same time on a single core. The ETX-CV's thermal design and powerful CPU core allow it to provide the same or even better performance than earlier generation modules at a more modest power consumption.
The ETX-CV supports up to 4 GB of DDR3 memory on a single SODIMM, incorporates an Intel
10/100BASE-T Ethernet controller, and provides dual channel IDE, two channels SATA, four USB
2.0 ports, two serial ports, one parallel port shared with floppy, one PS/2 keyboard/mouse
interface and HD audio.
The ETX-CV fully supports PCI and legacy ISA based on high speed PCI/ISA bridge and is
equipped with an AMI Aptio BIOS supporting embedded features such as Remote Console,
CMOS backup for battery-less operation, CPU and System Monitoring and Watchdog Timer.
ETX® Module with low power Dual Core Intel® Atom™ Processor N2600 1.66GHz with NM10 Chipset
ETX® Module with low power Dual Core Intel® Atom™ Processor N2800 1.83GHz with NM10 Chipset
ETX® Module with Dual Core Intel® Atom™ Processor D2550 1.86GHz with NM10 Chipset
High Profile Heatsink for ETX-CV with threaded standoffs
Heatspreader for ETX-CV with threaded standoffs for bottom mounting
Heatspreader for ETX-CV with through-hole standoffs for top mounting
High Performance Heatsink with Fan for ETX-CV with threaded standoffs