ADLINK Home > Products > > >
ADLINK-PXIe-9842-PXI & Modular Instruments-Digitizers/Oscilloscopes
[+] Enlarge Picture

Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote

 Get a Quote  
1-CH 14-bit 200 MS/s High-Speed PXI Express Digitizer/Oscilloscope

Features
  • PXI Express specification Rev. 1.0 compliant
  • Up to 200 MS/s sampling rate & High resolution 14-bit ADC
  • ±1 V Input range with 50 Ω input impedance and DC couple
  • Up to 100 MHz bandwidth for analog input
  • High speed PCI Express Gen 1 x4 bus interface
  • Scatter-Gather DMA data transfer for high speed data streaming
  • One external digital trigger input & one digital trigger output to stimulate external instruments
  • Fully auto-calibration
      |   |         

  Introduction  
  Highlights  
  Application  
  Software  
  Ordering Information  
The ADLINK PXIe-9842 is a 1-CH 14-bit 200 MS/s digitizer designed for applications such as LIDAR testing, optical fiber testing, and radar signal acquisition. The 100 MHz bandwidth analog input with 50 ohm impedance is designed to receive ¡Ó1 V high speed signal. With this simplified front-end design and high stable onboard reference, the PXIe-9842 provides not only high accuracy measurement results but also delivers high dynamic performance.

For applications that require data to be acquired and transferred in real-time, the PXIe-9842 utilizes the PCI Express x4 bus as its interface. When signals are converted from analog to digital data, the data will be transferred to host system memory continuously because of the high bandwidth of the PCI Express.
Dynamic Performance
The PXIe-9842 features 100 MHz high bandwidth analog input optimized to receive ¡Ó1 V high-speed signals with 50 £[ impedance. It also features superior dynamic performance that includes a 11.3 effective number of bits (ENOBs) and a 70 dB signal-to-noise ratio (SNR) with an input frequency of 10MHz sine wave. The benefit of PXIe-9842's exceptional dynamic characteristics is especially apparent in radar signal acquisition, optical fiber sensing, and LIDAR applications.

Application: Fiber Optic Detection

DTS (Distributed Temperature detection)

  • Based on Optical Time-Domain Reflectometer (OTDR) technology
  • Measures temperature using optical fibers rather than thermocouples or thermistors
  • Obtains countless accurate, high-resolution temperature measurements with a cost-effective solution

    Benefits of Digitizers for this application

  • High sampling rate with high resolution gathering accurate temperature data
  • High speed PXI Express interface for timely and uninterrupted transfer
  • Complete solution (PXIe chassis + controller + digitizer), saving costs and time to market

    Flash DEMO: Distributed Temperature Sensing with High-Speed Digitizer

  • Operating Systems
  • Windows® 2000/XP/Vista/7

    Recommended Software

  • VB.NET/VC.NET/VB/VC++/BCB/Delphi

    Driver Support

  • WD-DASK for Windows®
  • DAQPilot for LabVIEW™
  • DAQPilot for Windows®
  • DAQ-MTLB for MATLAB®


  • Get a Quote