PCI-9527 - PXI & Modular Instruments - Dynamic Signal Acquisition & Analysis - ADLINK Technology
ADLINK Home > Products > PXI & Modular Instruments > Dynamic Signal Acquisition & Analysis > PCI-9527
ADLINK-PCI-9527-PXI & Modular Instruments-Dynamic Signal Acquisition & Analysis
[+] Enlarge Picture

Contact Us
 Email Us
 Worldwide Offices
 Where to Buy

Get a Quote


 Get a Quote  Datasheet
24-Bit High-Resolution Dynamic Signal Acquisition and Generation Module

  • 24-Bit Sigma-Delta ADC and DAC
  • 2-CH simultaneous sampling analog input, and 2-CH simultaneous updated analog output
  • Supports IEPE output on each analog input, software-configurable
  • 432 kS/s maximum sampling rate with software programmable rate
  • Programmable input range: ±40 V, ±10 V, ±3.16 V, ±1 V, ±0.316 V
  • Programmable output range: ±10 V, ±1 V, ±0.1 V
  • AC or DC input coupling, software selectable
  • Trigger I/O connector for external digital trigger signal
      |  Datasheet |         

  Ordering Information  
The PCI-9527 is a high-performance, 2-CH analog input and 2-CH analog output dynamic signal acquisition board. This board is specifically designed for audio testing, acoustic measurement, and vibration analysis applications.

The ADLINK PCI-9527 features two 24-bit simultaneous sampling analog input channels. The 24-bit sigma-delta ADC provides a sampling rate up to 432 KS/s at high resolutions, making it ideal for higher bandwidth dynamic signal measurements. The sampling rate can be adjusted by setting the onboard DDS clock source to an appropriate frequency. All channels are sampled simultaneously and accept an input range from ±40 V to ±0.316 V. The PCI-9527 analog input supports software selectable AC or DC coupling and 4 mA bias current for integrated electronic piezoelectric (IEPE) sensors.

The ADLINK PCI-9527 also has two channels of 24-bit resolution, high fidelity analog output. The outputs occur simultaneously at software programmable rates up to 216 KS/s. A software programmable output range of ±0.1 V, ±1 V, and ±10 V is available on the output channels.

Cost-effective Solutions for Audio Testing White Paper

Get a Quote

   Contact Us | Career | Investor Relations | Partner Center | Sitemap |
Copyright © ADLINK Technology Inc., Specification and product names are trademarks or trade names of their respective companies or organizations.